How the SunAggregates wash plant works

McLanahan SunEnviro aggregate wash plant

In January 2025, SunEnviro opened its state-of-the-art aggregate wash plant in Thetford. From this single site, the company converts up to 70 tonnes of rubble and demolition waste per hour (around 100,000 tonnes a year) into recycled aggregates.

Here’s how the wash plant recovers waste materials and turns them into recycled aggregates for construction and landscaping.

Where do SunAggregates’ recycled materials come from?

Trailer and stacks of Sunskips

Construction and demolition waste comes into the system through SunEnviro’s skip hire and demolition arms, SunSkips and SunDemolition.

SunEnviro CEO Mat Stewart says the Thetford wash plant gives SunEnviro a practical way to recover more value from waste.

“All of our SunSkips and SunDemolition sites are full of fines and rubble, which is great feedstock for our Thetford site,” says Mat. 

“It sits in the middle of our network, so we can bring waste in and take washed sand or different-sized stone aggregates back to sell in bags or loose in skips.”

RELATED: Recycled vs primary aggregates: Which is best for your project? 

Inside the SunAggregates wash plant

McLanahan SunEnviro wash plant

Every stage of the wash process aims to recover more material, improve product quality, and cut the amount of waste that goes to landfill.

The recyclable rubble enters the wash plant through hoppers and conveyors. From there, the material moves through a series of stages that screen, scrub, wash, separate, and recover usable products for the local construction industry.

Step 1: Pre-screening and separation

Before the main washing stage begins, the incoming material passes through a pre-screen that pulls out the fines. The coarser material then moves into the scrubbing circuit, where the plant starts removing light contaminants such as wood, plastics, and organics.

From there, the material goes through final sizing so SunAggregates can separate clean recycled stone into different grades ready for stockpiling. This stage helps create a more consistent feed for the rest of the process and improves the quality of the finished products.

Step 2: Washing and scrubbing

Washing removes unwanted materials like clay, silt, twigs, roots, and other debris. Each aggregate passes through this stage to meet the required specification for its end use.

The Thetford wash plant uses a McLanahan UltraSCRUB. Once the materials pass through a de-sanding screen, they move through the washer, where the plant breaks down the feed material and frees up the usable aggregate. The system removes lightweight floating debris, lifts out more contamination, and gives the aggregate a final rinse and size separation before stockpiling.

Neil Mullan, director of sales for C&D recycling at McLanahan, said that removing contamination from trommel fines had long presented a major challenge before the UltraSCRUB came along.

He said, “This SunAggregates project demonstrates what’s possible when innovation and determination meet, transforming one of the industry’s toughest waste streams into a valuable, sustainable resource.”

Step 3: Sand recovery

SunAggregates wash plant

The plant also recovers valuable sand from the fines removed earlier in the process. Once that material leaves the pre-screen, it moves through the McLanahan UltraSAND system, where a Hydrocyclone strips out unwanted silt before a Dewatering Screen produces a cleaner, drip-free sand.

This stage both prepares a product for sale and also helps SunAggregates recover more usable material from each load while keeping more water in circulation inside the plant.

By this point, the site has produced several grades of recycled stone as well as a fill sand product, ready to go back into local construction.

But the process still has more value to recover from the wastewater stream.

Step 4: Water recovery and puddle clay production

SunAggregates wash plant vat

The aggregate wash plant operates on a closed-loop system that cleans and reuses water during the recycling process. This approach reduces environmental impact and improves efficiency, contributing to SunEnviro’s wider sustainability efforts.

The McLanahan High-Rate Thickener separates solids and liquids through a process called hindered settling. The system uses small amounts of carefully controlled chemicals to help fine particles clump together, while rotating arms move the settled sludge towards collection points at the bottom of the tank.

Yet more recyclable material is recovered using the McLanahan Filter Press. This system separates the finest particles from silt and slurry by hydraulically pressing the water through highly efficient filters, producing puddle clay. The recovered water is returned directly to the washing operations.

SunAggregates’ filter press can convert up to 40 tonnes of liquid silt slurry into dry, pressed cake in 90 minutes. That means even the finest waste stream can come back into use instead of creating another disposal problem.

RELATED: New SunAggregates silt press turns slurry to solid in 90 mins

Quality aggregates, responsibly produced

These recycling processes turn waste into high-quality aggregates for construction and landscaping projects.

Once cleaned and processed, the material is graded into:

  • Recycled fill sand: Used as filler for pipe bedding and a solid base layer for roads and pavements.
  • Recycled 10mm stone: A versatile aggregate for drainage, soakaways, and pipe bedding.
  • Recycled 20mm stone: A strong drainage option that also suits non-structural concrete, kerbing, roadworks, and landscaping.
  • Recycled 20mm+ stone: A coarse aggregate suited to drainage, soakaways, road foundations, and other heavy-duty applications.
  • Recycled puddle clay: Used in landfill capping and as a lining for ponds.

MORE: A complete guide to aggregate materials and their uses 

SunAggregates produces these materials with sustainability and quality in mind. All recycled aggregates meet rigorous BS EN 932-1 standards and Series 600 highway specifications.

That means the process does more than reduce waste. It puts reliable, hard-wearing materials back into use, reduces demand for virgin quarried materials, and supports a more circular construction industry.

“By offering recycled aggregates locally, we’re helping businesses reduce transportation costs and lower their carbon footprint,” adds Mat.

For businesses that want dependable recycled aggregates from a trusted local supplier, SunAggregates offers a practical way forward. If you’re laying roads, creating drainage, or planning a landscaping project, give our friendly team a call to discuss the right recycled materials for your needs.

Related posts